RADR Wireless Remote Assembly Docs
The RADR wireless remote uses a custom populated PCB assembly, display, battery, 3D-printed enclosure parts, printed controls, weather stripping, and tri-lobe screws.
Parts
This parts list is generated from hardware/bom.csv during the assembly-docs build. Do not edit the generated table by hand. Update the CSV instead. Parts are referenced throughout the Assembly Guide.
RADR-OSS/hardware/bom.csv · 05ed5fa
| # | Part Name | Category | Description | Qty | UOM | Manufacturer | MFG PN | Vendor | Vendor PN | Source | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Tri-lobe screw | FST | Thread-forming tri-lobe screw for RADR enclosure assembly | 5 | each | – | – | Shorpioen | BC-0408LTFB | – | – |
| 2 | Screen | ASM | IPS 2.0 inch 14-pin SPI LCD display, ST7789, 240 x 320 RGB | 1 | each | – | – | Aliexpress | ST7789/Screen No Touch | – | – |
| 3 | Battery | BTY | 3.7 V 800 mAh LiPo battery, 802735 format | 1 | each | – | – | Aliexpress | 802735 | – | – |
| 4 | RADR PCB assembly | PCA | RADR PCB v0.4 populated circuit-board assembly | 1 | each | – | RADR-PCB-V0.4 | JLCPCB | – | pcb/RADR - PCB Design Files v0.4/PCB - OSSM Wireless v0.4.pcbdoc | Top-level PCB assembly line item; detailed PCB EBOM remains in pcb/RADR BOM - OSSM Wireless - v0.4 - S3.xlsx. |
| 5 | Front housing | FDM | FDM-printed RADR front/top housing | 1 | each | – | – | – | – | Print Files/Remote - Top V1.01.step | – |
| 6 | Back housing | FDM | FDM-printed RADR back/bottom housing | 1 | each | – | – | – | – | Print Files/Remote - Bottom.step | – |
| 7 | Battery flap | FDM | FDM-printed battery flap | 1 | each | – | – | – | – | Print Files/Remote - Bottom.step | – |
| 8 | Side button | FDM | FDM-printed side button | 2 | each | – | – | – | – | Print Files/Buttons.step | – |
| 9 | Middle button | FDM | FDM-printed middle button | 1 | each | – | – | – | – | Print Files/Buttons.step | – |
| 10 | Power slider button | FDM | FDM-printed power slider button | 1 | each | – | – | – | – | Print Files/Power Switch.step | – |
| 11 | Knob | FDM | FDM-printed rotary knob | 2 | each | – | – | – | – | Print Files/Remote - Knob.step | – |
| 12 | Resealable bag | PKG | 6 x 8 inch, 1.5 mil resealable bag | 1 | each | – | – | ULINE | S-5065 | – | – |
| 13 | USB A to C cable | CBL | 25 cm USB-A to USB-C power cable | 1 | each | – | – | Aliexpress | 0.25m | – | – |
| 14 | Weather stripping | INS | 1 x 1/8 inch weather stripping, cut from 33 ft roll | 0.5 | in | – | – | Amazon | 1x1/8" | – | – |
Assembly Tools and Shop Supplies
| Item | Use |
|---|---|
| Rasp | Deburring the PCBA edge before enclosure fit-up. |
| T8 screwdriver bit | Installing tri-lobe enclosure screws. |
| Electric screwdriver or hand driver | Driving enclosure and battery-cover screws. |
| Isopropyl alcohol | Cleaning the PCBA before installing weather stripping. |
| Microfiber cloth | Cleaning the PCBA and protecting cosmetic surfaces. |
| Razor blade | Trimming the front-housing bumper features. |
| Hot glue gun | Securing the display into the front housing. |
| Small screwdriver | Opening the display ribbon connector and cleaning the knob bore. |